Sunday, February 27, 2011

Resistor Wheel Set Video

Here's a video showing how I install resistors on wheel sets so that each car can be detected by the computer controlled signaling system.


Posted by at

6 comments:

  1. Mrs AztecFebruary 28, 2011 at 5:37 AM

    This Video is a keeper. Bookmarked.

    Thank you.

    John Claudino

    ReplyDelete
  2. Mike DeBergMarch 2, 2011 at 8:13 PM

    Daryl, Awesome video. Looking to add detection on my modular layout so this method is just what I needed.

    Do you have the P/N for the conductive paint pen?

    ReplyDelete
  3. genevasubMarch 3, 2011 at 5:42 AM

    The Mouser part number is 577-2505-N

    Here's the url for the item;

    http://www.mouser.com/ProductDetail/Techspray/2505-N/?qs=sGAEpiMZZMtYFXwiBRPs0yeif%2ftslpVr

    ReplyDelete
  4. Jamie in Lilburn, Georgia, USAMarch 3, 2011 at 6:42 AM

    Thanks for posting this video. I just did a few wheelsets recently using your same process, except that I use construction adhesive rather than super glue to attach the resistor to the axle. Unfortunately I have two wheelsets done and a zillion to go. :) Jamie

    ReplyDelete
  5. AnonymousMay 10, 2011 at 9:29 PM

    Hey Daryl,

    Is there a particular type of super glue you're using?

    ReplyDelete
  6. genevasubMay 11, 2011 at 6:40 AM

    It just the cheap stuff that comes four tubes to a pack for $2 at Walmart.

    ReplyDelete

Subscribe to: Post Comments (Atom)