Made a little more progress on the Elmhurst Metra Station. Added platforms up and down the line from the main station area. Also added striping for the warning area close to the tracks. The kit come with yellow striping stickers, but I opted for some Tamiya striping tape I had on hand. I plan to add a bit of grey paint to the roof edges as I do not like the brown plastic. I also need to add streets, parking lots and landscaping. Plus, quite a bit of weathering. But, its coming along.
Just completed assembly of the Kato passenger station kit for use as the Elmhurst Metra station. The kit's prototype is the Schaumberg Metra station, which is larger than the Elmhurst station. However, I felt it was a good match for use in Elmhurst. The kit was a bit expensive, but it is a high quality kit and produces a very nice structure which work nicely as a Metra Station. I especially like the brickwork with mortar. As you can see from the photo, I did not plan real well so the kit extends off the layout. I will build a short "bump out" to support the kit. I also plan to add narrower 3/4" platforms extending in both directions about 12".
Did some more work on two bridges. I was not happy with the color of the Des Plaines River. It was two black and did not match the color from prototype pictures and did not match the picture I am using for the back drop. So, I repainted it a green/brown color and then added another layer of EnviroTex. I have also added more lighting for the Maywood/Proviso area, so the pictures are of better quality than last time.
For the Fox River, I painted the river a very dark green with brown highlights. This color matches the prototype photo I am using for the backdrop.