I adjusted the resistors for the SMD signals. Found out from Serge that the installed resistors were 1000 (green) and 1500 (red) ohms. After deciding that the result was just too dim, I removed the resistors and just went with the 100 ohm resistors that come with the Digitrax TSMK connectors. This was way too bright and probably would have greatly shorten the life of the LEDs. So I used 250 and 320 ohm which put the LEDs at the same brightness as the rest of my Sunrise signals. Below are a comparison between 1000/1500 and 250/320.
The Gravel Pit
2 years ago